|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CMF Military Vishay Dale Metal Film Resistors Military, MIL-R-10509 Qualified, Type RN Military, MIL-PRF-22684 Qualified, Type RL FEATURES * * * * * * Very low noise Very low voltage coefficient Controlled temperature coefficient Excellent high frequency characteristics Flame retardant epoxy coating Commercial alternatives to military styles are available with higher power ratings. See appropriate catalog or web page DIELECTRIC STRENGTH VAC -- -- 51R - 150k -- 4R3 - 470k -- -- 450 450 450 500 700 900 900 STANDARD ELECTRICAL SPECIFICATIONS MODEL MAXIMUM WORKING VOLTAGE 200 200 250 300 350 350 500 -- 10R - 301k -- 10R - 1M -- 10R - 2M 10R - 2.49M VISHAY DALE(R) MILITARY APPROVED VALUE RANGE () MIL-R-10509 CHARACTERISTIC D CHARACTERISTIC C CMF-50 CMF-55 CMF-07 CMF-60 CMF-20 CMF-65 CMF-70 10R - 100k 49R9 - 100k -- 49R9 - 499k -- 49R9 - 1M 24R9 - 1M CHARACTERISTIC E 10R - 100k 49R9 - 100k -- 49R9 - 499k -- 49R9 - 1M 24R9 - 1M MIL-PRF-22684 Vishay Dale commercial value range: Extended resistance ranges are available in commercial equivalent types. Please contact us by using the email at the bottom of this page. TECHNICAL SPECIFICATIONS PARAMETER Voltage Coefficient Insulation Resistance Operating Temperature Range Terminal Strength Solderability UNIT ppm/V C lb CONDITION 5 when measured between 10% and full rated voltage 1010 minimum dry; 108 minimum after moisture test - 65 / + 175 (See derating curves for military range) 5 pound pull test for RL07/RL20; 2 pound pull test for all others Continuous satisfactory coverage when tested in accordance with MIL-R-10509 and MIL-PRF-22684 ORDERING INFORMATION - MILITARY PART NUMBER RN MIL. TYPE Per MIL-R-10509 60 SIZE 50 65 55 70 60 07 SIZE 07 20 D CHARACTERISTIC E = 25ppm/C C = 50ppm/C *D = + 200ppm/C - 500ppm/C S LEAD S= Solderable 3483 VALUE First three digits are significant figures. Last digit specifies the number of zeros to follow. (348 kilohm illustrated.) 471 VALUE First two digits are significant figures. Last digit specifies the number of zeros to follow. (470 ohm illustrated.) F TOLERANCE B = 0.1% C = 0.25% D = 0.5% F = 1% J TOLERANCE G = 2% J = 5% RL MIL. TYPE Per MIL-PRF-22684 *Vishay Dale supplies 100ppm parts for characteristic D. www.vishay.com 48 For Technical Questions, contact ff2bresistors@vishay.com Document Number: 31027 Revision 18-Oct-02 CMF Military Metal Film Resistors, MIL Qualified DIMENSIONS in inches [millimeters] 1.50 0.125 [38.10 3.18] A Vishay Dale C Max. B D MODEL CMF-50 CMF-55 CMF-60 CMF-65 CMF-70 CMF-07 CMF-20 A 0.150 0.020 [3.81 0.51] 0.240 0.020 [6.10 0.51] 0.344 0.031 [8.74 0.79] 0.562 0.031 [14.27 0.79] 0.562 0.031 [14.27 0.79] 0.240 0.020 [6.10 0.51] 0.375 0.040 [9.53 1.02] B 0.065 0.015 [1.65 0.38] 0.090 0.008 [2.29 0.20] 0.145 0.015 [3.68 0.38] 0.180 0.015 [4.57 0.38] 0.180 0.015 [4.57 0.38] 0.090 0.008 [2.29 0.20] 0.145 0.015 [3.68 0.38] C (Max.) 0.244 [6.20] 0.278 [7.06]* 0.425 [10.80] 0.687 [17.45] 0.687 [17.45] 0.278 [7.06] 0.425 [10.80] D 0.016 0.002 [0.41 0.05] 0.025 0.002 [0.64 0.05] 0.025 0.002 [0.64 0.05] 0.025 0.002 [0.64 0.05] 0.032 0.002 [0.81 0.05] 0.025 0.002 [0.64 0.05] 0.032 0.002 [0.81 0.05] * .290" [7.37mm] for 0.25% and 0.1% resistance tolerances. MATERIAL SPECIFICATIONS Element: Coating: Nickel-chrome alloy Flame retardant epoxy, formulated for superior moisture protection Fire-cleaned high purity ceramic ENVIRONMENTAL SPECIFICATIONS General: Environmental performance is shown in the Environmental Performance table. Test methods are those specified in MIL-R-10509 and MIL-PRF-22684. Resistance shifts due to storage at room temperature are negligible. Core: Termination: Shelf Life: Standard lead material is solder-coated copper. Solderable and weldable. APPLICABLE MIL-SPECS MIL-R-10509 and MIL-PRF-22684: The CMF models meet or exceed the electrical, environmental and dimensional requirements of MIL-R-10509 and MIL-PRF-22684. Noise: Vishay Dale metal film resistors have exceptionally low noise level. Average for standard resistance range is 0.10 micro-volt per volt over a decade of frequency, with low and intermediate resistance values typically below 0.05 micro-volt per volt. Vishay Dale CMF resistors have an operating temperature range of - 65C to +175C. They must be derated according to the following curves: % OF RATED POWER 120 100 80 60 40 20 MIL-PRF-22684 MIL-R-10509 Char. D Rating MIL-R-10509 Char. C & E Rating 0 50 70 90 110 130 150 170 AMBIENT TEMPERATURE C DERATING Document Number: 31027 Revision 18-Oct-02 For Technical Questions, contact ff2bresistors@vishay.com www.vishay.com 49 CMF Military Vishay Dale MILITARY POWER RATING MILITARY QUALIFIED MIL-R-10509 @ + 70C WATTAGE 0.05 0.10 0.125 0.25 0.50 1.0 (D) Metal Film Resistors, MIL Qualified @ + 125C (C & E) MIL-PRF-22684 @ + 70C -- -- -- CMF-07 (RL07) CMF-20 (RL20) -- -- -- CMF-55 (RN55) CMF-60 (RN60) CMF-65 (RN65) CMF-70 (RN70) CMF-50 (RN50) CMF-55 (RN55) CMF-60 (RN60) CMF-65 (RN65) CMF-70 (RN70) -- Note: Commercial equivalents of military styles are available with higher power ratings. Consult factory. 100 80 HEAT RISE (C) 60 3/4 W 40 1/2 W 1/4 W 20 1/8 W 1/10W 0 CMF-55 CMF-07 CMF-60 CMF-20 CMF-65 CMF-70 1/4 W 1/4 W 1/8 W 1/2 W HEAT RISE The increase in resistor surface temperature due to rated load is shown in the chart above. Resistor temperature = heat rise + ambient temperature. TEMPERATURE COEFFICIENT CODE VISHAY DALE TEMPERATURE COEFFICIENT CODE T-1 T-2 T-9 T-00 TEMPERATURE COEFFICIENT 0 100ppm/C 0 50ppm/C 0 25ppm/C 0 200ppm/C TEMPERATURE RANGE - 55C to + 175C - 55C to + 175C - 55C to + 175C - 55C to + 150C www.vishay.com 50 For Technical Questions, contact ff2bresistors@vishay.com Document Number: 31027 Revision 18-Oct-02 CMF Military Metal Film Resistors, MIL Qualified MARKING Characteristics: D = T-1, C = T-2, E = T-9 Tolerance: F = 1%, D = 0.5%, C = 0.25%, B = 0.1% Value = three significant figures and multiplier J = JAN (joint Army - Navy) brand RN50: (3 lines) J50D 1211 F137 JAN, type, characteristic Value Tolerance & 3 digit date code RN55, RN60, RN65, RN70 (4 lines) DALE 0137J RN55D 1211F Company Logo 4 digit date code and JAN brand Type and characteristic Value and Tolerance Vishay Dale (RL series are color banded per MIL-PRF-22684) PERFORMANCE MIL-R-10509 REQUIREMENT RN50 RN55 RN60 RN65 RN70 RL07 RL20 MIL. Temperature Coefficient Applicable Vishay Dale(R) TC Code POWER RATING RN50 RN55 RN60 RN65 RN70 RL07 RL20 TEST Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Shock Vibration Load Life Dielectric Withstanding Voltage Effect of Solder CHARACTERISTIC D CMF-50 CMF-55 CMF-60 CMF-65 CMF-70 -- -- + 200 - 500ppm/C T-1 (100ppm/C) @ + 70C -- 0.125 Watt 0.25 Watt 0.5 Watt 0.75 Watt -- -- MIL. (Max.) 0.50% R 0.50% R 0.50% R 1.50% R 0.50% R 0.50% R 1.00% R 0.50% R 0.50% R CHARACTERISTIC C CMF-50 CMF-55 CMF-60 CMF-65 CMF-70 -- -- 50ppm/C T-2 (50ppm/C) @ + 125C 0.05Watt 0.10 Watt 0.125 Watt 0.25 Watt 0.50 Watt -- -- MIL. (Max.) 0.25% R 0.25% R 0.25% R 0.50% R 0.25% R 0.25% R 0.50% R 0.25% R 0.10% R CHARACTERISTIC E CMF-50 CMF-55 CMF-60 CMF-65 CMF-70 -- -- 25ppm/C T-9 (25ppm/C) @ + 125C 0.05 Watt 0.10 Watt 0.125 Watt 0.25 Watt 0.50 Watt -- -- MIL. (Max.) 0.25% R 0.25% R 0.25% R 0.50% R 0.25% R 0.25% R 0.50% R 0.25% R 0.10% R MIL-PRF-22684 -- -- -- -- -- CMF-07 CMF-20 200ppm/C T-00 ( 200ppm/C) @ + 70C -- -- -- -- -- 0.25 Watt 0.5 Watt MIL. (Max.) 1.00% R 0.50% R 0.50% R 1.50% R 0.50% R 0.50% R 2.00% R 0.50% R 0.50% R Document Number: 31027 Revision 18-Oct-02 For Technical Questions, contact ff2bresistors@vishay.com www.vishay.com 51 |
Price & Availability of CMFMILITARY |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |